Industrial Portable Fan-Driven Ozone Generator 5 g/hour

5 g/hour Compact Fan-Driven Ozone Generator

The 5 g/hour compact fan-assisted ozone generator is a model in the same portable family that offers lower capacity, power, and weight. Its distinctive technical specifications include 5 grams of ozone production per hour, 66 W nominal power, 2,8 kg weight, and 24 × 13 × 30 cm body dimensions.

This model differs from the 10, 20, and 30 g/h products not only in capacity but also in body ratio and production frequency. The 5 g/h device has a frequency of 6 kHz, while the larger models are specified as 10.000 Hz. Therefore, the family contents have not been copied exactly; the model's own datasheet has been used as the basis.

Production of 5 g/hour corona discharge.

The device produces 5 grams of ozone per hour using the corona discharge method and employs air cooling. This capacity should be selected based on calculations of the target volume and application time. The 5 g/hour value does not represent the automatically generated ozone concentration in the environment.

The actual concentration depends on the ambient volume, temperature, relative humidity, surface charge, air exchange, and operating time. Therefore, the suitability of the device should not be determined solely by a general statement such as "small area," but must be verified through technical calculations and measurements.

66 W power and 6 kHz production frequency

The operating voltage is AC 220 V, the mains frequency is 50–60 Hz, and the nominal power is 66 W. The corona discharge generation frequency is given as 6 kHz. The electrical wiring and grounding at the installation point must comply with these values.

The operating environment is 3–30 °C temperature and relative humidity below 65%. Air cooling inlets must be left open, and the device should not be operated in conditions exceeding the humidity limit.

2,8 kg compact portable design

With dimensions of 24 × 13 × 30 cm and a weight of 2,8 kg, the device is significantly more compact than larger models. The integrated fan helps distribute the produced ozone into a controlled area. Fan flow rate and noise level are not given numerically.

Timing options are listed as automatic, flip-flop, shock, and adjustable. The duration range for each mode should be checked in the user manual. Information on quiet, long-term operation and CE certification is provided on the source.

Controlled and measured use

Ozone can be harmful through inhalation. The device should only be used by trained personnel following the prescribed evacuation, warning, timing, subsequent ventilation, and measurement procedures. It should not be operated unsupervised in areas where people or animals are present.

• Professional applications where 5 g/h capacity is calculated to be sufficient.
• The compact device, weighing 2,8 kg, is suitable for the required tasks.
• Projects where 66 W power and 6 kHz transmission frequency are suitable.
• Controlled areas requiring adjustable timing

Technicial Specifications

• Capacity: 5 g/hour
• Method: Corona discharge
• Cooling: Air cooling
• Production frequency: 6kHz
• Electricity: AC 220 V, 50–60 Hz
• Power: 66 W
• Environment: 3–30 °C; relative humidity <65%
• Weight: 2,8 kg
• Timing: Automatic, flip-flop, shock-absorbing, adjustable.
• Dimensions: 24x13x30 cm
• Certification: CE