PROCART JET 701S Single Bucket Press Cleaning Set

PROCART JET 701S Single Bucket Press Cleaning Set

PROCART JET 701S Tek Kovalı Presli Temizlik Seti, çalışma malzemelerini ve ekipmanlarını düzenli biçimde taşımak için kullanılan bir modeldir. Ölçüleri 36,5 × 70,5 × 80 cm olarak belirtilir.

Hardware and usage features

• Model: PROCART JET 701S
• Wheels: 4 × Ø80 mm; plastic body, rubber tread and bumper
• Press bucket: 35 L
• Press: 1 × upright press
• Barkod: 8697435938606

Materials and structure

• Body: 4 mm PP

Dimensions and capacity

• Product dimensions: 36,5x70,5x80 cm
• Weight: 5,94 kg

Product usage details

The PROCART JET 701S is a single-bucket press cleaning set designed for the needs of mop operators cleaning floors. It can be incorporated into routine cleaning flows in hotel corridors, offices, and similar common areas. The correct use of the equipment depends not only on the bucket capacity but also on the cleaning method and mop system used. The single-bucket design should be considered in work scenarios where multi-compartment chemical or water separation is not required.

The product data specifies one 35-liter press bucket and one upright press. This equipment is used to facilitate the squeezing of excess liquid accumulated in the mop into the bucket. Correct dilution of the cleaning chemical and selection of the appropriate mop for the surface directly affect the cleaning result. In facilities that require the use of separate solutions for different hygiene zones, the suitability of a single-bucket system should be evaluated based on the facility's cleaning procedures.

The PROCART JET 701S is made of 4 mm polypropylene (PP). Its dimensions are 36,5 × 70,5 × 80 cm, and its weight is 5,94 kg. This data helps in planning the space allocated for the equipment in service storage areas and the cleaning route. If the product is to be stored together with cabinets, doors, and other cleaning equipment, not only the base dimensions but also the space occupied by mop and handle accessories during use should be taken into account.

The current technical record indicates that there are four Ø80 mm wheels. The wheels are listed with plastic housing, rubber tread, and buffer details. Ground thresholds, doorways, and turning areas should be considered when evaluating mobility. The suitability of the wheels according to the surface type can be examined in conjunction with on-site conditions. It is important to avoid overloading the bucket during transport and for personnel to take precautions against water spills.

Equipment layout for daily operations.

The arrangement of shelves, cabinets, bins, and collection compartments is chosen according to the materials to be moved during the operation. When evaluating the product's equipment, you can plan together the equipment that personnel will use in the same trip and the access order of the materials.

Location and use

Compare the dimensions of the cart to the corridor, doorway, and storage space where it will be used. Load capacity differs from the unladen weight of the product; consider these two factors separately in load planning. The wheel and handle arrangement should also be considered in relation to the need for maneuvering and parking in the work area.

Browse other products in the Cleaning Sets collection.